| HopUp: Adjustable Capacity: 22 rds Built Material: Full Metal Weight: 1.98lbs Length: 8.46" Caliber: 6mm Item #: 07050816 |
![]() |
| Beretta M9A1 Reloading
Beretta M9A1 Setting the CO2 Cartridge Beretta M9A1 Shooting Beretta M9A1 Adjustable Spin Up / Hop Up Beretta M9A1 After Shooting Caution |
![]() To remove the magazine, press the release (1) located on the left side of the grip. Slide magazine out. |
![]() Pull down the spring with the release (1). Fill the magazine with the appropriate 6 mm BBs as shown(2). Maximum capacity is 22 BBs. Take care to place the BBs as shown on the picture (3). |
| back to top | |
![]() Push up the release located on the bottom |
|
![]() Slide out the cover as shown on pictures. |
![]() Unscrew the bottom of the magazine. |
![]() Insert the CO2 cartridge in the magazine as shown on the picture. | ![]() Screw the bottom of the magazine. When pressure starts increasing in the magazine (expansion of the CO2 in the magazine can be heard), finishing screwing rapidly. Very important: do not tighten excessively, it could permanently damage the O'rings. |
![]() Slide back the cover of the magazine in its place. | ![]() Slide the magazine in the grip until it is locked (a distinct click will be heard). |
| back to top | |
![]() In order to fire, you have to cock the gun : pull the slide backward as shown and release. |
|
![]() To begin shooting, unlock the safety mechanism, aim at the target and pull on the trigger (1). |
Caution:Never aim at a person. Never fire at a hard surface at close range as pellets will rebound. |
| back to top | |
![]() First, remove the magazine. Press the release as shown on picture 1. |
|
![]() Then, push the slide forward (3) to separate it from the body. |
|
| back to top | |
![]() After emptying the magazine, push the safety mechanism back into the locked position. |
|
| back to top |
|
| CAUTION
DISASSEMBLING (TAKING APART) THIS SOFTAIR PRODUCT VOIDS ALL WARRANTY. PRODUCT MUST BE RETURNED IN ITS ORIGINAL PACKAGING. FEDERAL LAW PROHIBITS ALTERING OR REMOVING THE ORANGE MARKING OR PAINTING OVER THE TRANSPARENT PART OF THIS PRODUCT. Do NOT use 6mm paintballs with this softair. Shooting paintballs with
this unit will result in jamming and will void warranty. Warning |
| back to top |