Operating

Main Operating Loading Firing Adjustments Safety

Parts of the pistol:

Operating the Safety

To put the pistol "On Safe," locate the safety directly behind the trigger. Push the safety from the left side all the way in (Fig. 1). The safety is not on unless it is pushed all the way in and the red ring around the safety is not showing. The pistol will not fire when "On Safe."
Even when the safety is "On Safe," you should continue to handle the pistol safely. Don't point the gun at anything you don't intend to shoot.
To take the pistol "Off Safe," push the safety slide forward. When you can see the red ring around the safety, the safety is "Off Safety." The rifle is now ready to fire. Do not ever point the air rifle at any person.

Pumping the Air Pistol

Put the pistol "On Safe."
Open the forearm all the way until it stops (Fig. 2). Close it with a smooth stroke using the heel of your hand. Don't pinch hand or fingers when the forearm closes. Keep your finger off the trigger while pumping.
Be sure to use at least two pumps to prevent the barrel from jamming with a pellet.
Do not twist the forearm while pumping. Use straight stokes to prevent breakage.

Cocking Your Air Pistol

Put the pistol "On Safe."
Open the bolt by rotating the handle 1/4 turn counterclockwise and pull back all the way until you hear two clicks and bolt stays rearward (Fig. 3).